How Black Mold Affects You And What You Can Do About It

The toxic kind of "Black Mold" is known as the Strachybotrys atra. This slimy, greenish black substance can actually lead to health risk such as asthma and bronchitis. Studies conducted by the Center of Disease Control or the CDC reflect that this mold is the reason for over "100 cases of lung disorders."

Molds can also be located in anyone's home. These industrial molds may not be toxic and it takes a lot of time and effort to specify which mold is toxic and which isn't because it will entail laboratory exams. However, the best conclusion we can tell you is that if a mold is found in your home, it is considered to not be a healthy home.

Mold is a parasite which attaches itself to various hosts: be it people, animals, clothes, shoes or even the doors and windows of houses. These spores grow faster when it is moist and damp. Some molds even develop under water.

Look above your ceiling now and check for molds. If there is a spot which is frequently wet from rain and drips a lot, chances are you'd see some molds there. Also, go to the bathroom and check your tiles. Chances are there is a bit of a mold there.

Wall paneling and cardboard, they can have molds in it. Even cotton. Clothes you haven't worn for a long time now and has been stocked up in the attic or in the basement can have molds attached to it.

Try touching a mold. It is slimy. Try rubbing it on the surface. It would smear its greenish and blackish fluid.

Once you see a mold, try to remove it when you can. Clean it up as soon as possible. Although these can be easily done if the infested area is small like leak and plumbing problems. These can easily be handled by bleach and water. If you want, you can also add soap to the solution that you have handy there. Apply the bleach solution to the moldy are and let it stay there for about fifteen minutes. Then concentrate on the surrounding areas. This will lessen the chance for the mold to spread any further.

If the mold is located in insulation or on fabrics like carpet, then it will be harder to remove it. An infested area that is over 2ft is termed "highly infested" and it is something you cannot remove on your own. It is best you seek professional help in eradicating that risk. If you ignore the molds, this could result to flooding and possible health risks.

It is because if you take these molds not as serious as you should, they can actually lead to you inhaling them, therefore risking your health.

Prevention is better than cure and you can actually apply these preventive measures so you won't have any black mold to eradicated in the first place.

- Keep the humidity down in your house. Double check if the ventilation is just right in rooms in your household - specifically the bathroom and the kitchen. It is because molds usually appear in these two rooms.

- Before painting any of your walls, add mold inhibitors.

- Clean the carpet by using mold killing products even if there is no mold found. The same applies in the bathroom tiles and corners.

It may seem to not be a problem but it is. Black mold are something everyone must learn how to eradicate and better yet, prevent.

In institutions, black mold can actually cause an allergic reaction to people who have allergies to black mold. People who also have respiratory problems such as asthma may also have their attacks triggered through these infested areas.

A clean home is a mold-free home. Molds are a form of bacteria. Just like any kind of bacteria, it must be extinguished as soon as possible.

Lee Dobbins writes for http://mold.home-webzone.com/ where you can learn more about controlling all types of mold.

Spring Cleaning: Out With The Mold

Are black spots showing up on the bathroom walls and ceilings? Is a musty smell curling your nose? Let's face it, you've got mold. A touch of mold doesn't present much of a health problem for healthy adults but can cause coughing, sneezing and wheezing. For people with ailments such as asthma, lung disease, allergies and immune disorders, mold is a much bigger problem.

Houses are a great place for mold spores to settle in and thrive. The drywall, paper, wood and insulation make for an ample supply of food. When these materials get wet, mold spores multiply becoming thriving colonies of black gunk. The musty odors are waste products from the growing mold. The odors are a sign that mold is actively growing and thriving. One of the best ways to clear out the mold is to eliminate its environment. Molds need water in order to grow, so by eliminating excess water buildup, you can stop the growth.

The first task is to repair any leaks, including pipes, roof, water heater, toilet seals etc. Next use the exhaust fans in the kitchen and bathrooms. If you don't have an exhaust fan, install one. If it's humid, use a dehumidifier or air conditioner.

Next, you must remove the mold itself. If your mold troubles are extensive, consider hiring a professional. For smaller trouble spots, you can tackle the job on your own. If you're not sure, it's best to let a pro take a look.

Always wear goggles, gloves and a mask. Seal off the area from the rest of the house so the spores don't travel and settle in elsewhere. Cover the air conditioning and heating vents, recessed lighting, electrical switch plates, doors and any other opening that spores might be able to travel through. Open the windows to the outside for ventilation.

Now that the area is prepped, scrub all surfaces with a mild cleaner or detergent. Next, mix a ? cup of bleach with one quart of water and scrub with this solution taking care not to drip on carpet, towels and other fabrics or materials. Take a break for 20 minutes or so, in another room. After 20 minutes, repeat the bleach scrub down. Finally, apply a solution of a borate based detergent to the surfaces and do not rinse this off.

Remove the coverings from the air conditioning vents and vacuum the floor. Wash any towels, area rugs, bedding, etc from the affected area

If you are looking for advice for that home improvement project or thinking of starting a handyman business check out our site.

7 Steps for Easy Elegance: Visually Enhance Any Room with Panel Molding

Panel molding dates back to the Georgian period of the 1700's. Georgian architecture is characterized by a sense of proportion and balance. Symmetry and adherence to the classical rules were valued as regular and desirable. Today, panel molding is used to break up large surfaces, which adds a formal feeling to most designs. It is also utilized as a border separating colors or textures. Visually enhance any room with decorative panel molding; from walls and doors to ceilings, these exquisite accents can be installed by the average do it yourself home owner.

As with any project, proper safety practices should be used at all times. That includes wearing hearing and eye protection as appropriate. If you need to use a respirator, dust mask or any other tool or equipment, always select the right one for the job.

Planning
When beginning any project, it is important to plan the layout. Establishing a plan keeps the job flowing smoothly. It is perhaps the most important step. Although installing panel molding requires that you have a good drawing that accurately shows the room and the pattern, you won't need to generate detailed blueprints. A pencil sketch on graph paper will do. Be certain that the measurements are accurate. Reference dimensions on the drawing to either the center of the room (or to a ceiling dome or ceiling medallion, etc..) or to the walls. This will depend on the dominant feature of your design. Although you may not have any interest in recreating an extravagant baroque ceiling for your own home, you can often find some great pattern ideas by studying the ceilings of historic castles and palaces. Look around your room and decide whether you will have full or split panels; single size or variable sizes, or symmetric sized panels. Panel molding is strictly a decorative element, so there are no rules to follow for the design. This is your opportunity to create a unique and individual design.

Ordering
When ordering your panel molding make sure that the pattern of the molding is compatible with the corners (if you are using corners) and that you have made adequate allowance for cutting waste. Remember to take pattern repeat into account when figuring cutting waste. I like to use a cut list for all trim work. It allows me to plan all of the joints before I start cutting. I use the same list to plan my order. Normally, panel molding is inexpensive due to its small profile. Therefore, you may want to save some work and order enough to eliminate as many joints as possible. You are also going to need adhesive, caulk, etc. to complete the installation.

Prefinishing
If you are not planning to finish (paint or faux finish) the ceiling and the molding at the same, you may want to prefinish the molding and then touch it up after installation.

Assemble Materials
Setup a work area close to the job and assemble your tools and materials. Look over the moldings to make sure they haven't been damaged either on shipping or on the job. Inventory your tools and supplies to ensure that everything you will need is there. If something is missing, stop and get it now rather than waiting until you need it, which inevitably is at the worst possible time.

Layout
Transfer your plan to the ceiling in full size. Layout the outline of the molding rather than the centerlines so the layout will be visible with the molding installed. Remember to reference patterns that surround ceiling domes or ceiling medallions, to the center of the feature they surround. Reference moldings that run parallel to walls to the wall (to minimize the effect of out of square or wavy walls).

Install
Because of their light weight no mechanical fasteners are required. Use an appropriate size bead of adhesive and temporary fasteners as necessary until the adhesive sets.

Finish Up
After the adhesive has set, remove the temporary fasteners or set below surface. Caulk the joint between the ceiling and the molding. Fill the holes made by the fasteners with non-shrink filler, sand, prime and paint.

Voila! Enjoy and relish in the glow of all the compliments you receive when others see how beautiful your room is with the simple addition of panel molding.