Finishing Touches To Home Renovations Using Easy Crown Moldings

Home renovations can be tedious, time consuming and expensive. By the time you purchase all the necessary tools, and materials to complete your job the mountain of work ahead can be quite daunting. If you have worked hard on fixing up your home then having it look as professional as possible is a must, and the finishing touches are as important as every other part of the project. When selecting materials to finish a room it is important to choose products that are easy to use (if you are a first time/amateur renovator), that look nice and really showcase all the trouble you went to. Mouldings are one such detail that can make or break a project you have undertaken, and two choices available are easy crown mouldings, and plastic injection mouldings.

Easy Crown Mouldings: simple to use, but do they look professional?

So you have done the drywall, plastered, painted and are ready for the finishing accents to really bring the project to a close. Easy crown mouldings; the name suggests the level of usability required to install. With Easy crown mouldings there is no need for mitre saws or finishing nails to properly measure and affix your crown mouldings to the upper portion of your wall. To properly trim this specific type of moulding you simply require the knowledge of: how to use a pair of scissors. This removes the hassle of complicated angle measurements to properly line up corners. Sounds simple enough; however, how do they measure up to the old fashioned way of using tools and angle measurements?

According to some renovations experts; though, they are easy to use they leave you in the lurch quality wise. Because the trimming is done with scissors accuracy on trimming is always an issue, and rarely do seams meet properly (it is said that seams in easy crown mouldings can be taped over though). Is this how you want to finish a project that you have sweated hours over? With Easy Crown Mouldings there are also issues of installation on the wall. Yes they are easy to use for all levels of expertise. To stick these mouldings to the wall, you must simply remove the layer of tape on the back (revealing a layer of tacky adhesive) and firmly press into place in the desired location. How reliable is the adhesive? Well on the aforementioned website where tests have been performed... after very little time the glue gave out and the Easy Crown Mouldings fell down to the floor which brings up 2 new problems: how do you firmly re-attach them to the wall? And how to repair the tears in the paint left behind after the adhesive has torn it off the wall.

Obviously like other products you get what you pay for, and cheap and fast generally results in hassles, and more work. There are others that state that these so called "Easy Crown Mouldings" are not as easy to install as the name states.

Plastic injection mouldings: more complicated, and more expensive

Plastic injection mouldings are probably the exact opposite of the Easy Crown Moulding. The creation of Plastic injection mouldings is not one for an amateur home renovator unless they specifically want to learn how to make them as the process is time consuming and tedious. Simple table top machines and moulds can be made to form your mouldings; however, the necessary tools list is far more expensive than that of ordinary wooden mouldings. Welders and drill presses are two of the said required machines to create your own, not to mention the plastic pellets which must be purchased to melt and form your mouldings.

For those who aren't interested in learning the process behind making your own plastic injection mouldings, using this type of finishing product is not realistic as tracking them down through your local home renovations store will be quite complicated. If you are dead set on using them tracking them down can be daunting.

John Mann is an experienced home renovator and webmaster. Visit his website Workbench Ideas for workshop tips - www.workbench-ideas.com

What You Should Know About Mold and Water Damage

The harmful effects of mold span the immune system and respiratory system. Most molds grow on wood, fiber, or paper that has gotten wet for more than a few days. One of the main causes of household mold is water damage that is improperly repaired. Whenever these kinds of situations arise, it is essential not only to the vitality of the home, but to the health and well being of its occupants as well to repair and mold and damage from water whether you are in Houston or Hawaii. There are many methods that you can use to repair water damage in home depending on the location of the damage.

Knowing What to Repair You can determine many of the repairs that need to be made by simply looking around the home for the places that water damaged. Sometimes basement water damage is easier to fix than water damage in other parts of the home because there is less furniture and other amenities in the basement. Once you have determined the places that need water damage, then you can start to make the repairs.

Completing the Repairs By Clearing The Air When you have finished making the repairs, it might be difficult to keep your home free of mold. Your health is at stake here and may have already been affected because of mold spores caused by the water damage. Sometimes there could be even the slightest amount of moisture in even the most remote locations of the home that can cause mold to form that releases harmful spores into the air. At the very least, you need to get a good air purifier. You need to act fast to find and clean the mold. You should also hire a professional to conduct an air quality lab report in order to determine if your air quality is safe for breathing. If the professional determines that the air quality is not desirable, then he or she will make recommendations as to what you can do to make sure the air is safe.

Regardless of the location, water damage should be repaired so that mold does not grow inside the home and the air quality remains at a safe level.

Adam O'Connor is the owner of http://www.handheldguru.com which provides free information on handheld electronics. He is an expert in this industry and his website helps people find helps people find answers to questions like how can you compare PDA's or what is the best pocket PC for you.

You Can't Run, You Can't Hide, Mold Will Eventually Find You

Mold is everywhere and no one can escape it. You'll find it in the air, on surfaces, in the refrigerator, in the house or office, and outside. Like karma, it's one of those things that you can't run from. You can't hide from it. Mold will creep into everyone's lives and homes at some point or another.

While mold is not a health concern for many people, it can create moderate to severe allergic or asthmatic reactions for others.

Aside from health considerations, mold is an ugly fungus that damages your home or office. It's something you don't want.

The first step in dealing with mold is to identify and correct its cause. The rule of thumb is this: No mold can grow without moisture. If the amount of mold is not too big, mold remediation in your home can be a do-it-yourself job. The sooner you can get rid of the mold, the better. This is because the longer mold is allowed to grow the more difficult it is to clean up.

Molds reproduce by spreading tiny spores. These microscopic spores float on air currents until they can find a suitable spot to grow. If you have existing mold spots, the spores obviously do not have trouble finding good breeding grounds. With a mix of moisture and other conditions, these spores will germinate and produce new mold growth.

When inhaled by some people, these spores create allergic reactions or exacerbate asthmatic conditions. If you are suffering from allergic reactions to airborne mold spores, you might consider using a negative ionizer (or negative ion generator). Negative ions are able to remove the spores from the air.

Having mold in your home is certainly not uncommon. It's a little known fact that 70% of homes have mold in their wall cavities. Some homes are worse than others. Homes with bad mold damage might have mold spores growing from the shower head that become airborne and then take over large portions of bedroom or other walls. Obviously, homes that have had flood damage will also fare worse in the mold department than others.

If ignored, small moldy areas will grow larger over time, so it's important to remediate little patches of mold as soon as you see them. If mold is visible, it is not necessary to test for mold. Take care of it straight away.

Remediation is the term used for the cleanup and removal of the mold infestation or growth. If the job is small enough, mold remediation might be something you want to do yourself by drying the area, scrubbing away the mold and using bleach to kill the mold. There are also antimicrobial coating products on the market that you can use to remove mold and prevent its re-growth. Any product that touts mold killing abilities should have an EPA registration number on the label. No cleanup or remediation is complete until you have repaired the water or moisture problem that contributed to the mold's growth in the first place.

Mold is something that everyone has to deal with at some point or another. The best way to handle mold in your home is to stop it early by reducing the moisture that contributes to the mold growth. Use a negative ion generator to remove spores from the air. As soon as you see small mold patches, remediate them before they become a bigger problem.

Mold will eventually find you, no matter how much running, hiding, or ignoring you do. Discover how to fight back by visiting http://www.mold-mildew-info.com

Toxic Mold & Disease

 

Asthma has increased 300 percent in children in the past ten years. Research by WHO, in Germany, finds prostate cancer, breast cancer, and other cancers increasing due to mold-related problems.

Mold is the number one health problem with one in every three persons affected by mold and one in ten with a severe problem related to mold. These can range from the common cold, tonsillitis, otitis, sinusitis, bronchitis, asthma, and pneumonia, to cancer.

Check your home's humidity levels; buy or borrow a hygrometer and watch the changes in R.H. that occur throughout a typical day in different rooms of the house and over the heating season. To inspect your home for mold growth, winter is the best time except for basements which should also be inspected in the summer. With a flashlight and some simple tools, go through the entire house, both inside and outside, searching for moisture damage and mold growth and their potential causes.

The Stachybotrus species of mold is dangerous; it will start growing in 80 percent humidity but, once established, can grow at 55 percent humidity. This mold can develop from the decay of building materials and is much harder to control. If more than ten square feet develop, it is advised that a professional clean it up. When you see a small speck of mold, that's only part of the problem - the remainder being inside the walls.

'Frog Page' is a manual of the health of the environment and states that frogs are declining because of mold.

Some of the causes of mold are brush and trees within 30 feet of the building; venting the clothes drier inside the home; furniture against outside walls; old fill, causing building movement leading to cracks causing water ingress; concrete will wick up water even to several feet above ground; ventilation not directed outside, such as the kitchen range hood, which should be vented outside; plants and aquariums; drying clothing indoors; standing water, such as keeping cold water in the kitchen sink; hot tubs; using several gallons of water to wash floors.

'Sick Building Syndrome' is caused by moisture and mold growth. It migrates through foundations up from the soil. A dehumidifier is not the final answer as it only does the air and not the walls. What is required is a combination of ventilation, circulation, and heat.

Carpenter ants and termites will smell moisture from miles away and they only attack damaged wood.

Ventilation alone won't help a crawl space. In the summer the vents bring in warm, moist air.

Mold forms on the coldest space. The only
way to deal with it is with heat. Wall heaters with fans are more efficient than baseboard heaters.

Pull furniture and store material away from exterior walls and off basement floors; leave closet doors ajar; leave bedroom doors open as much as possible; undercut doors; don't block or deflect warm air registers; open drapes, blinds, and curtains; set the furnace fan to run continuously. This will use more electricity but can be offset by installing a two-speed energy-efficient motor; don't cut off the heating supply or close off unused rooms.

Uninsulated or poorly insulated areas such as exterior corners or foundation walls, should be improved with additional insulation. Be sure to install an air-vapor barrier, usually polyethylene, on the room side of the insulation to prevent hidden condensation behind the insulation. Seal hidden opening into the attic, tighten the attic hatch, weatherstrip and caulk around windows and doors, gasket electrical outlets, caulk baseboards and seal the top of foundations. Using an air conditioner on muggy summer days also helps take out the moisture.

Humidifiers, dehumidifiers, air-conditioning units and filtration systems can be a source of mold growth if they are not regularly cleaned.

Key areas to check for moisture sources leading to condensation inside the home are roof leaks [especially at chimneys, flashings, skylights and eavestroughing]; wall leaks [especially at window and door flashing and sills]; foundation leaks [especially where the ground slopes toward the foundation]; and plumbing leaks [especially at toilet bases and under sink drains].

Check any fuel-burning equipment - furnaces, hot water heaters, boilers, fireplaces, and wood stoves - to ensure that they are venting properly. A blocked chimney could mean that combustion products, including large amounts of water vapor, are spilling into your house. Along with that moisture come dangerous combustion gasses, such as carbon monoxide, which cause deaths every year. Have heating equipment and venting systems checked by a trained service person.

If your moisture remedial work includes extensive air sealing, be sure that all fuel-burning equipment has an adequate supply of combustion air. High efficiency furnaces, for example, have their own air supplies and exhaust fans but conventional equipment may rely on house air for combustion and on 'natural draft' to move combustion products up the chimney flue. If starved for air or overpowered by an exhaust fan somewhere else in the house, such equipment can spill combustion gasses indoors. Examples of this include stains near the vent of a gas water heater, smoke entering the room from a wood-burning fireplace or stove, and pilot lights being blown out.

Mold growth often occurs in out-of-the-way areas like closets, corners, walls behind furniture and unused rooms. Increasing air circulation to these areas warms the cold surfaces and lowers local humidity levels.

To solve moisture problems, cover any exposed earth in a crawl space or basement with heavy polyethylene, sealed and weighted-down; slope soil away from foundations to keep basement walls and slab dry; patch any foundation leaks; don't use humidifiers, unless humidity levels are below 30 percent R.H.; avoid drying firewood indoors; operate bathroom exhaust fans during a bath or shower; use your range hood exhaust when cooking; avoid steam-cleaning carpets in winter; clean mold from wood and gyproc with a 10 percent to 30 percent solution of hydrogen peroxide applied with a spray bottle. This is more effective than bleach and water.

If you use chlorine bleach, mix one part bleach with two parts water and a little detergent to clean nearby surfaces. Leave for 15 minutes and rinse well. Use gloves and protective glasses and good ventilation. Badly mildewed carpets, furnishings and books will probably need to be thrown out.

Molds are parasitic micro-organisms that appear as black, white or multi-colored stain or fuzz. In addition to causing asthma, they can cause other allergies and serious health problems. There are tens of thousand of varieties of molds and are difficult and expensive to identify, even for experts. Health officials recommend eliminating all molds from inside your home.

Most mold spores need condensation or damp materials to germinate and once are established, many colonies generate their own moisture and can continue to survive even under dry conditions. They also need mild temperatures and a source of food, such as house dust or drywall paper.

Resources:

1. Natural Resources Canada [NRCan] "Air-Leakage Control" Pg. 11 [20 Feb 2002]

2.WHO [World Health Organization] [20 Feb. 2002]

3. Cormier, Dr. Y., Centre de Recherche, Hopital Laval, 2725 Chemin Ste-Foy, Ste Foy, Quebec Canada, G1V-4G5 Institut de Recherche en Sante et Securite du Travail (IRSST), Quebec Canada July 21, 1999; revised; accepted for publication November 26, 1999.

4. http://www.cdc.gov/ncidod/dbmd/ [20 Feb. 2002]

5. http://ehpnet1.niehs.nih.gov/qa/105-10news/NIEHSnews.html [20 Feb.2002]

6. http://water.usgs.gov/pubs/FS/fs-043-01/
[20 Feb. 2002]

Margot B, Writer, Information Broker, Web Developer at
Margot B & Associates
mailto:margotb@wonderport.com
http://www.writers.Org-HQ.com