How to Mold Your Current Job into the Perfect Career

Sometimes, no matter what our mantra is about loving our job, we just have to admit that it's hard to figure out how to get our career moving in the right direction. And we all know we're not getting any younger. Here are a few tips in molding your current job into the perfect career.

Little Steps Rather Than One Big Stride
Aiming for a promotion? Then start early, by doing things a litle bit better each day. Don't compete with your next-cubicle workmate; compete with yourself, and try to exceed your own expectations.

Learn from the Experts
Instead of envying workmates who has made it big in the company, try to learn from their experience. They'll be more than flattered to impart advice.

Get a hold of technology!
The office is no place for techno-phobes. Learn everything you possibly can about the software needed in your field, and you'll quickly make yourself more marketable. But don't limit yourself to just one software. Study other software because you never know when you're going to need them.

Keep Learning
The world we live in is fast-paced and new knowledge and information is transformed every second. Don't let your education stop the moment you leave school. The world is the much bigger arena for learning, and it pays to explore and keep learning. Those who are stagnant lose out early.

Turn your officemates into allies
Sound relationships with your workmates lead to better office productivity. Instead of perpetually competing with them for the top of the ladder, try to turn them into allies and teammates. When it comes to promotion time, it's not just skills and knowledge that matters but work ethics too.

Read a lot
Especially books that teach and update you in your fields of interest as well as in others. Pay attention to the quality of what you read, and before you know it, you would have added precious knowledge to your arsenal.

______________________________________________________
Get a job in Australia, and jumpstart that career opportunity! OzFreeOnline is your user-friendly free job classifieds where it's absolutely free to sign-up and post your resume. Browse all the great job opportunity in Australia and jumpstart your career!

At OzFree, you're in demand!

Barbara Thorp is an article contributor for Jobs section of OzFreeOnline.com

You Can't Run, You Can't Hide, Mold Will Eventually Find You

Mold is everywhere and no one can escape it. You'll find it in the air, on surfaces, in the refrigerator, in the house or office, and outside. Like karma, it's one of those things that you can't run from. You can't hide from it. Mold will creep into everyone's lives and homes at some point or another.

While mold is not a health concern for many people, it can create moderate to severe allergic or asthmatic reactions for others.

Aside from health considerations, mold is an ugly fungus that damages your home or office. It's something you don't want.

The first step in dealing with mold is to identify and correct its cause. The rule of thumb is this: No mold can grow without moisture. If the amount of mold is not too big, mold remediation in your home can be a do-it-yourself job. The sooner you can get rid of the mold, the better. This is because the longer mold is allowed to grow the more difficult it is to clean up.

Molds reproduce by spreading tiny spores. These microscopic spores float on air currents until they can find a suitable spot to grow. If you have existing mold spots, the spores obviously do not have trouble finding good breeding grounds. With a mix of moisture and other conditions, these spores will germinate and produce new mold growth.

When inhaled by some people, these spores create allergic reactions or exacerbate asthmatic conditions. If you are suffering from allergic reactions to airborne mold spores, you might consider using a negative ionizer (or negative ion generator). Negative ions are able to remove the spores from the air.

Having mold in your home is certainly not uncommon. It's a little known fact that 70% of homes have mold in their wall cavities. Some homes are worse than others. Homes with bad mold damage might have mold spores growing from the shower head that become airborne and then take over large portions of bedroom or other walls. Obviously, homes that have had flood damage will also fare worse in the mold department than others.

If ignored, small moldy areas will grow larger over time, so it's important to remediate little patches of mold as soon as you see them. If mold is visible, it is not necessary to test for mold. Take care of it straight away.

Remediation is the term used for the cleanup and removal of the mold infestation or growth. If the job is small enough, mold remediation might be something you want to do yourself by drying the area, scrubbing away the mold and using bleach to kill the mold. There are also antimicrobial coating products on the market that you can use to remove mold and prevent its re-growth. Any product that touts mold killing abilities should have an EPA registration number on the label. No cleanup or remediation is complete until you have repaired the water or moisture problem that contributed to the mold's growth in the first place.

Mold is something that everyone has to deal with at some point or another. The best way to handle mold in your home is to stop it early by reducing the moisture that contributes to the mold growth. Use a negative ion generator to remove spores from the air. As soon as you see small mold patches, remediate them before they become a bigger problem.

Mold will eventually find you, no matter how much running, hiding, or ignoring you do. Discover how to fight back by visiting http://www.mold-mildew-info.com

Removing Mold Stains from Your Hardwood Floors

 Wood floors are a glorious addition to your home, as well as extremely practical. They are good in all types of weather and last a very long time, as long as they're taken care of. And that's where things get a bit soggy-literally. Even if you're super careful with your floor, any water or liquid left standing for a long time can cause mold to develop.

This is especially true of plant and flower pots that are kept inside and leak. Now the leak may be quite small so that you don't notice it for months, and then you realize that the floor around the plant is looking a little worse for wear. You lift the plant up and lo and behold, a moldy mess has established itself into the cracks of your beautiful hardwood floor.

Not to worry, however, as there are ways to get rid of the mold, and if it is finished like most floors, the wood itself will remain in tact and unharmed; only the finish will suffer.

The first thing to do is buy a scraper from your local hardware store. Size doesn't really matter, but it should be at least eight inches wide and a few inches high. Pull along the grain of the wood and adjust the pressure just so the edge is scraping the finish. Don't dig in too deep, as you can mar the wood.

Next, purchase a sanding sponge specifically for finish removal (180 grit will work fine too) at your hardware store or shop. Sand, again, along the grain until the mold, or most of it, is gone. If there is still some residue left after all this use a very small amount of diluted Clorox bleach on the area. You have to be careful, though, as too concentrated of a solution can ruin the floor.

After you're done sanding or bleaching, run two hundred grit sand paper lightly over the wood. Re-finish the wood with the same finish, if possible. If not, find the nearest match, but do be careful as matching finishes can be tough. Always test a tiny, hidden, and out of the way spot before you do anything, and that includes using the bleach solution.

Hopefully this clears up your mold problem, but prevention is the best protection. Make sure any flower or plant pots you have in the house are properly potted without the possibility of leaking, and ensure that any pet urine or other water spill is cleaned up as soon as possible. Do this, and your floor will remain beautiful and elegant well into old age.

www.fastfloors.com

How to Use Do-It-Yourself Toxic Mold Test Kits

 

How to Use Do-It-Yourself Toxic Mold Test Kits

VANCOUVER, CANADA. Many homeowners, landlords, renters, property managers, business owners, and employees want to know, and need to know, the precise identities of the various toxic mold species inhabiting their home, rental property, or place of work, according to Phillip Fry, Certified Mold Inspector and author of the mold book Do-It-Best-Yourself Mold Prevention, Inspection, Testing, and Remediation.

To identify correctly toxic mold species, take these two steps: (1) use do-it-yourself mold test kits to collect mold samples during a thorough and complete building mold inspection and investigation; and (2) send the collected mold test samples to a mold laboratory for mold analysis and mold species identification.

Testing Visible Mold Growth

If a resident or occupant sees mold growing on a wall, ceiling, floor, heating or cooling duct register, or any other surface, he can scrape mold particles off the mold growth area onto the sticky surface of the opened mold test kit.

During such scraping of the mold growth, the tester needs to wear rubber gloves and a full-face respirator mask with organic vapor filters (such as the 3M brand from a large hardware, home improvement, or safety store) to protect against toxic mold exposure.

To do the scraping, use a new or thoroughly disinfected (with ethyl or rubbing alcohol) paint scraper. Disinfect the scraper after each individual sampling to remove any possible mold contaminants, and thus avoid mold cross-contamination in the sampling process from one sample location to another.

Print clearly and neatly on a large pressure sensitive label the property owners name, the property address, the precise test location at that address, the testing date, and the type of sampling method (mold test kit settling), time duration of the test (e.g., thirty to sixty minutes) along with the testers name and contact information.

The label should also include each individual test number, as listed on the mold chain of custody form, available free from the mold laboratory. Attach the label to the bottom of the mold test kit that contains that respective, numbered mold sample.

Mold Testing of the Indoor Air

Use a separate mold test kit to collect a mold sample from the air of each of these areas---

1. Heating/cooling duct register. Expose the sticky side of an open mold test kit (one for each duct register) to the outward airflow from each separate heating/cooling duct register. Tape the open test kit to the duct grill so that the airflow directly hits the sticky surface.

Run the heating/cooling system on fan ventilation for 10 minutes prior to removing the mold test kit from each tested duct register. Then close, seal, and label each mold test kit.

2. Room Air by the Settling Method. Mold test the air of each room, attic, basement, crawl space, and the garage by first running a cleaned fan to stir up each room or areas air all around for about 15 minutes.

Thoroughly clean the fan blades and fan guard with rubbing alcohol or ethyl alcohol after the fans use in each separate testing location.

Then shut off the fan, open up a mold test kit, place it open side upwards in the middle of the room [on the floor, or upon a table or chair] for thirty minutes to one hour to allow airborne mold spores to settle down onto the sticky surface of the mold test kit.

Be sure to use the same time for all air test locations for the standardization of the mold test results. Then close, seal, and label the mold test kits.

3. Outdoor Mold Control Test. The mold lab results of the indoor mold tests have the most significance when the results of each indoor locations testing can be compared with the results of the outdoor mold control test.

The control test should be a mold test kit left open on the ground outside the building and at least five feet beyond the drip edge of the room. Use the same time (thirty minutes to one hour) that was utilized in the indoor air tests for the settling method tests. There should be no rain or snow falling.

Self-Interpretation of Mold Test Kit Results

The tester can then either watch the test kits himself for mold growth, with self-interpretation of the mold test kit results, over a seven day time period, or send the mold test kit to the mold lab immediately, or after the self-observation growth period.

Here is how to self-interpret the visible mold growth in the mold test kits after seven days of mold growth---

1. If the tester observes and count a greater number of mold colonies of any particular mold colony type (possessing the same or similar color, shape and/or structural pattern) growing in one indoor mold test kit than in the outdoor control mold test kit, then the tester can reasonably decide that there is a possible indoor-generated mold infestation in the area/location involved in that particular mold test.

2. If the tester observes a particular mold colony type growing in a particular indoor mold test sample that is NOT present in the outdoor control mold test, then the tester can reasonably conclude that there is a possible indoor-generated mold infestation in the area/location in which he conducted that particular mold test.

3. If the tester observes three or more of the same mold colony type growing in one mold test kit, then the tester can reasonably conclude that there is a possible mold infestation in the area/location in which he conducted that particular mold test, regardless of the number of similar mold colonies present in the outdoor control test.

Why is that conclusion possible? Consider this rat analogy: if there are only three rats living inside a particular area of ones home or building, is there no indoor rat problem just because there are more rats living immediately outside of the home or building?

It is the time-cumulative exposure and body intake of even modest numbers of indoor airborne mold spores that makes residents or occupants sick from mold exposure. Because residents or occupants spend many hours per day indoors in a home or workplace, they are continually inhaling or ingesting mold spores.

When the mold spores enter into the residents eyes, nasal/sinus areas, lungs, stomach (eating and drinking food and beverages upon which airborne mold spores have landed), or open body sores, the mold-spores, once inside the body, can begin dangerous mold growth inside the body because of the abundance of body moisture and food to eat (peoples bodies)!

4. If the tester observes three or more of the same mold colony types in several or many mold tests taken from different areas of the home or building, the tester can reasonably conclude that the mold species is possibly widespread in its contamination of the tested home or building.

The most dangerous mold species to residents and occupants are the molds that are omni-present through out the home or building, thus causing widespread, cumulative mold exposure and body intake.

For more information about the use of mold test kits, mold laboratory analysis, and mold species identification, please visit---

http://www.moldlab.biz
http://www.moldinspector.com
http://www.moldmart.net
Mr. Phillip Fry is a Certified Mold Inspector and a Certified Mold Remediator. He is the author of the ebooks Mold Health Guide and Do-It-Yourself Mold Prevention, Inspection, Testing and Remediation. He also co-authored the another ebook known as Mold Legal Guide.