Mold Allergy And What To Do

25 million Americans suffer from allergic reactions to molds, most of them don't even realize they have a mold allergy; that when they are sneezing and sniffling the cause is molds.

Mold spore allergy is common as mold can be found almost everywhere, and all molds reproduce by spores, and send the spore airborne, which causes allergic reactions in many individuals.

Airborne mold spores can cause you to be ill and eventually destroy your health. Many people are unaware that they are breathing mold spores until they are very sick.

As stated, molds produce airborne toxins - these can cause serious breathing difficulties, memory and hearing loss, dizziness, flu-like symptoms, and bleeding in the lungs. Yes, it can be that bad.

So it is important to find out where you might have mold in your home and at work by doing a mold test. Molds can be found wherever there is moisture, oxygen, warmth and something to feed on. Warmth and high humidity stimulate mold growth, so mold allergy tends to be most prevalent during the hot, humid summer months.

One of the easiest ways to find out if you have mold in your home is to order a mold test kit online. Look around a little for tests that will test for many molds, or ones that will test for black mold specifically.

A mold test kit is also a great way to test for mold at work. If you find a high count, then go to your supervisor or boss with the information and ask them to do something about it as you have a mold allergy, and others are probably being affected as well.

Get to the bottom of your mold allergy. Now you want to look around for mold in your home. Start with a visual inspection for both mold and moisture around windows, sinks, and water lines.

If you kit shows that you have mold in your home, you may need to get to the bottom of your mold allergy by having a mold inspector come to your home. An inspector will give you a much more thorough inspection that you would not be able to do for yourself.

The inspector will look at such things as:

Humidity of the indoor air, using a properly calibrated meter
Heating, ventilating and air conditioning systems
Moisture barriers for proper installation and condensation
All water-damaged areas, and locate the point of water intrusion

Mold allergy can make you seriously ill, so take steps soon to locate mold in your home and clear it.

Article By Jeannie Crabtree C.Ac. Learn more tips about Allergy and Allergy Relief by visiting her site and getting the Health Tips Newsletter and other Health and Nutrition tips.

Removing Mold Stains from Your Hardwood Floors

 Wood floors are a glorious addition to your home, as well as extremely practical. They are good in all types of weather and last a very long time, as long as they're taken care of. And that's where things get a bit soggy-literally. Even if you're super careful with your floor, any water or liquid left standing for a long time can cause mold to develop.

This is especially true of plant and flower pots that are kept inside and leak. Now the leak may be quite small so that you don't notice it for months, and then you realize that the floor around the plant is looking a little worse for wear. You lift the plant up and lo and behold, a moldy mess has established itself into the cracks of your beautiful hardwood floor.

Not to worry, however, as there are ways to get rid of the mold, and if it is finished like most floors, the wood itself will remain in tact and unharmed; only the finish will suffer.

The first thing to do is buy a scraper from your local hardware store. Size doesn't really matter, but it should be at least eight inches wide and a few inches high. Pull along the grain of the wood and adjust the pressure just so the edge is scraping the finish. Don't dig in too deep, as you can mar the wood.

Next, purchase a sanding sponge specifically for finish removal (180 grit will work fine too) at your hardware store or shop. Sand, again, along the grain until the mold, or most of it, is gone. If there is still some residue left after all this use a very small amount of diluted Clorox bleach on the area. You have to be careful, though, as too concentrated of a solution can ruin the floor.

After you're done sanding or bleaching, run two hundred grit sand paper lightly over the wood. Re-finish the wood with the same finish, if possible. If not, find the nearest match, but do be careful as matching finishes can be tough. Always test a tiny, hidden, and out of the way spot before you do anything, and that includes using the bleach solution.

Hopefully this clears up your mold problem, but prevention is the best protection. Make sure any flower or plant pots you have in the house are properly potted without the possibility of leaking, and ensure that any pet urine or other water spill is cleaned up as soon as possible. Do this, and your floor will remain beautiful and elegant well into old age.

www.fastfloors.com

Mold QandA: Understanding Mold In Your Home

* How does mold enter a home?

Molds usually enter a home through spores that pass through open doorways, ventilation, windows, heating and air conditioning systems that have outdoor air intakes. The mold spores also attach themselves to humans, animals, shoes, clothing, bags and other objects that are capable of carrying spores.

When spores reach a place of moisture, especially those places where there is excessive moisture, they will attach and grow themselves. This will serve as their breeding ground. Molds usually grow in moisture rich places and those that are quite cold. The most common places where molds grow are in roofs, pipes, walls and plant pipes.


* How does mold grow?

Molds grow in different ways. Molds have tiny spores and these tiny spores have the capabilities of reproducing themselves through sexual and asexual reproduction. In sexual reproduction of mold, spores need another spore for them to reproduce. In asexual reproduction of mold, a single spore can reproduce by itself without requiring another spore.

Mold spores can reproduce themselves anywhere. They can grow and reproduce in soil, roof, and pots and even in air. Molds grow rapidly in places that have excessive moisture and have quite dim lightings.


* What kinds of health problems could there be if there is mold in my house?

Mold exposure may cause cold-like symptoms like watery eyes, sore throat, wheezing and dizziness. Allergic reaction to mold is common. It triggers asthma attacks. In addition, exposure to mold can irritate the eyes, skin, nose, throat and lungs.

Molds produce allergens, irritants and in some cases, potentially toxic substances that are dangerous to the human body.


* On what kinds of surfaces can mold grow?

Molds never choose the surface where to grow and breed; rather, they survive as long as a surface has excessive moisture. Moisture seeps through concrete walls and floors, wood and plastics and other materials that will cause dampness resulting in molds on walls, floors, carpeting and others.

The bathroom is the most susceptible place for mold growth because it is always damp. Soap scum, shower walls, ceramic tile and fiberglass are all possible surfaces for mold growth.

Basement and laundry rooms are also common for mold growth. The kitchen is also a possible site for mold.

There is no required surface for mold. Any surfaces are susceptible to mold growth if moisture is present.


* How can I reduce the humidity in my home?

Reducing the humidity at home can be done in many ways. There are simple ways that are effective in reducing the dampness at home which is the main reason of mold growth.

The following are three effective simple ways of reducing humidity at home.

? Remove standing water.
? Dry out your home.
? Remove wet materials.

And also insulate your home properly.
Maye Teasdale is a regular contributor to mold education sites such as Mold Question and Answer. Website: http://www.MoldQA.com

How to Use Do-It-Yourself Toxic Mold Test Kits

 

How to Use Do-It-Yourself Toxic Mold Test Kits

VANCOUVER, CANADA. Many homeowners, landlords, renters, property managers, business owners, and employees want to know, and need to know, the precise identities of the various toxic mold species inhabiting their home, rental property, or place of work, according to Phillip Fry, Certified Mold Inspector and author of the mold book Do-It-Best-Yourself Mold Prevention, Inspection, Testing, and Remediation.

To identify correctly toxic mold species, take these two steps: (1) use do-it-yourself mold test kits to collect mold samples during a thorough and complete building mold inspection and investigation; and (2) send the collected mold test samples to a mold laboratory for mold analysis and mold species identification.

Testing Visible Mold Growth

If a resident or occupant sees mold growing on a wall, ceiling, floor, heating or cooling duct register, or any other surface, he can scrape mold particles off the mold growth area onto the sticky surface of the opened mold test kit.

During such scraping of the mold growth, the tester needs to wear rubber gloves and a full-face respirator mask with organic vapor filters (such as the 3M brand from a large hardware, home improvement, or safety store) to protect against toxic mold exposure.

To do the scraping, use a new or thoroughly disinfected (with ethyl or rubbing alcohol) paint scraper. Disinfect the scraper after each individual sampling to remove any possible mold contaminants, and thus avoid mold cross-contamination in the sampling process from one sample location to another.

Print clearly and neatly on a large pressure sensitive label the property owners name, the property address, the precise test location at that address, the testing date, and the type of sampling method (mold test kit settling), time duration of the test (e.g., thirty to sixty minutes) along with the testers name and contact information.

The label should also include each individual test number, as listed on the mold chain of custody form, available free from the mold laboratory. Attach the label to the bottom of the mold test kit that contains that respective, numbered mold sample.

Mold Testing of the Indoor Air

Use a separate mold test kit to collect a mold sample from the air of each of these areas---

1. Heating/cooling duct register. Expose the sticky side of an open mold test kit (one for each duct register) to the outward airflow from each separate heating/cooling duct register. Tape the open test kit to the duct grill so that the airflow directly hits the sticky surface.

Run the heating/cooling system on fan ventilation for 10 minutes prior to removing the mold test kit from each tested duct register. Then close, seal, and label each mold test kit.

2. Room Air by the Settling Method. Mold test the air of each room, attic, basement, crawl space, and the garage by first running a cleaned fan to stir up each room or areas air all around for about 15 minutes.

Thoroughly clean the fan blades and fan guard with rubbing alcohol or ethyl alcohol after the fans use in each separate testing location.

Then shut off the fan, open up a mold test kit, place it open side upwards in the middle of the room [on the floor, or upon a table or chair] for thirty minutes to one hour to allow airborne mold spores to settle down onto the sticky surface of the mold test kit.

Be sure to use the same time for all air test locations for the standardization of the mold test results. Then close, seal, and label the mold test kits.

3. Outdoor Mold Control Test. The mold lab results of the indoor mold tests have the most significance when the results of each indoor locations testing can be compared with the results of the outdoor mold control test.

The control test should be a mold test kit left open on the ground outside the building and at least five feet beyond the drip edge of the room. Use the same time (thirty minutes to one hour) that was utilized in the indoor air tests for the settling method tests. There should be no rain or snow falling.

Self-Interpretation of Mold Test Kit Results

The tester can then either watch the test kits himself for mold growth, with self-interpretation of the mold test kit results, over a seven day time period, or send the mold test kit to the mold lab immediately, or after the self-observation growth period.

Here is how to self-interpret the visible mold growth in the mold test kits after seven days of mold growth---

1. If the tester observes and count a greater number of mold colonies of any particular mold colony type (possessing the same or similar color, shape and/or structural pattern) growing in one indoor mold test kit than in the outdoor control mold test kit, then the tester can reasonably decide that there is a possible indoor-generated mold infestation in the area/location involved in that particular mold test.

2. If the tester observes a particular mold colony type growing in a particular indoor mold test sample that is NOT present in the outdoor control mold test, then the tester can reasonably conclude that there is a possible indoor-generated mold infestation in the area/location in which he conducted that particular mold test.

3. If the tester observes three or more of the same mold colony type growing in one mold test kit, then the tester can reasonably conclude that there is a possible mold infestation in the area/location in which he conducted that particular mold test, regardless of the number of similar mold colonies present in the outdoor control test.

Why is that conclusion possible? Consider this rat analogy: if there are only three rats living inside a particular area of ones home or building, is there no indoor rat problem just because there are more rats living immediately outside of the home or building?

It is the time-cumulative exposure and body intake of even modest numbers of indoor airborne mold spores that makes residents or occupants sick from mold exposure. Because residents or occupants spend many hours per day indoors in a home or workplace, they are continually inhaling or ingesting mold spores.

When the mold spores enter into the residents eyes, nasal/sinus areas, lungs, stomach (eating and drinking food and beverages upon which airborne mold spores have landed), or open body sores, the mold-spores, once inside the body, can begin dangerous mold growth inside the body because of the abundance of body moisture and food to eat (peoples bodies)!

4. If the tester observes three or more of the same mold colony types in several or many mold tests taken from different areas of the home or building, the tester can reasonably conclude that the mold species is possibly widespread in its contamination of the tested home or building.

The most dangerous mold species to residents and occupants are the molds that are omni-present through out the home or building, thus causing widespread, cumulative mold exposure and body intake.

For more information about the use of mold test kits, mold laboratory analysis, and mold species identification, please visit---

http://www.moldlab.biz
http://www.moldinspector.com
http://www.moldmart.net
Mr. Phillip Fry is a Certified Mold Inspector and a Certified Mold Remediator. He is the author of the ebooks Mold Health Guide and Do-It-Yourself Mold Prevention, Inspection, Testing and Remediation. He also co-authored the another ebook known as Mold Legal Guide.