Molded vs Assembled Network Cables

What are the differences between molded and assembled network cables? We will try to make this short and easy. A molded cable is usually stronger against the pull of gravity, accidental bumping, and overall a more reliable cable. You can usually tell a molded cable because there is some extra plastic just under the RJ45 connector and you can see the plastic is injected into the RJ45 connector.

An assembled cable is usually made by hand. There is no plastic injected into the RJ45 connector, and there is no extra plastic under the RJ45 connector. Do not confuse an assembled cable with a boot with a molded cable. There are also assembled cables with boots. These have a rubber cover around the connector to protect the clip from getting snagged. But, they make the end of the cable bigger and hard to plug into a switch because they bump into the cable next to it.

As you can see it is hard to tell a molded cable from an assembled cable with a boot. The easiest way to tell is that the boot is bigger than the RJ45 connector where with a molded cable the snagless clip is the same size as the connector.

Another nice feature of a molded cable is that you get the benefit of having a snagless end with sacrificing extra space. Molded cables are great for high density switches where there are lots of cables next to each other. An assembled cable with a boot would be too big but, a molded cable is perfect because they fit better but you also have the snagless clip so that when you have to move a cable it does not get caught on the other cables.

Chris Frank is one of the owners of Network Cables Online, LLC sells network cables, ethernet products, computer cables, Power over Ethernet clock, and PoE LED Displays.

http://www.NetworkCablesOnline.com

Black Mold Removal And Small Bathroom Remodeling: How To Keep It Out

Black mold is a fungus that spreads relentlessly in your bathroom

Very few bathrooms escape the dreaded black mold fungus. Sooner or later it finds a nice damp corner of your shower or your walls and begins to grow. Slowly at first then before you know it it's all over your beautiful bathroom. Black mold is notoriously difficult to get rid of and control but a cure is possible. I reveal the secret below.

How to spot black mold in your bathroom

Well it's difficult to miss it. It's a black blight, which starts in corners and cracks then grows along joins and seals. The bigger it gets the faster it grows It loves to follow the lines of silicon sealer and grout between ceramic tiles. It seems to get inside the silicon sealer even the fungal resistant kind. It can turn your lovely bathroom into a dirty pit if you don't do something about it quickly.

General measures to keep black mold out of your small bathroom

There are some common sense things that you can do to slow down the march of the black mold in your bathroom. Black mold thrives on moisture so keep your bathroom well ventilated. Open windows and doors after use and wipe down surfaces to encourage them to dry faster.

Wiping down all ceramic surfaces with a dilute solution of bleach every few days will also help to slow down the growth of the fungus.

Traditional remedy for black mold in the bathroom

The traditional cure for black mold has been to cut out the affected areas of sealer and grout and any bits of wall covering that is contaminated. Wash the whole place down with a dilute solution of bleach and then re tile, re grout and re seal. This cures the problem for a while but sooner or later, usually only a few months or weeks later, the black mold returns.

This is a very frustrating cycle to be riding on because you have to keep doing it. Many people eventually just give up and the black mold takes over.

The secret that can banish black mold from your small bathroom

Black mold in my small bathroom had been defeating my efforts to keep it under control and finally I decided to remodel the whole bathroom which I thought would get rid of it forever. Was I wrong! I managed to keep it out for a few short months but somehow it found it's way in again.

I cut out and replaced the contaminated silicon sealer but this only slowed it down. Then someone told me about a product called 'Mold and Mildew Remover'. You simply spray it onto the affected areas then leave it for 3-5 minutes before rinsing it off. This sounded too good to be true but I thought that I would give it a try anyway.

The person that told me about the product also told me that the secret was to be patient with it and not expect to see instant results from just one spraying so I set about treating the affected areas of my little bathroom 2-3 times a week and watched what happened. After the first month I dropped the treatment to 2-3 times a month.

The results were nothing short of amazing and fantastic. I thought that I saw an improvement after the first week and after the second week I was convinced that the black mold was at least not growing any more. After a month the patches of black mold were definitely smaller than they had been and after 6 months they are nowhere to be seen. They have completely vanished and I'm so very pleased with it.

Get the full story of how I beat the black mold in my small bathroom in the article Small Bathroom Black Mold Removal

How to fit a shower into a very small bathroom Small Bathroom Shower at www.bathroomsremodeling.this-info.com Steve Gee

Remedies For Taking Out The Smell For Mold And Mildew

Do you have a mildew problem, basement mold that is creating a funky musty odor? The odor is very common in your basement, mildew mold is from a warm moist climate. Hence most basements are moist and dark they are great breeding grounds for black mold. It is even familiar when there is a heavy amount of mildew present, that a susceptible individual could acquire allergies and common mold symptoms from the mold settling on the surface. By just having a small amount of basement mildew mold in the house, one could become quite sick just by walking into the small area. This happens because there is no circulation of fresh air and when inhaling the airborne mold spores in a warm musty basement the toxic mold spores will enter into the system and attach into the bodies lungs and nasal cavities.

These will cause some common and very harmful mold symptoms, such as headaches, water eyes, and others. Some common symptoms of mold are coughing, headaches, scratchy throat, and blood in the lungs. Mold symptoms become common in individuals who have lower immunity such as the elderly and infants. We call this immuno comprimised. Having mold in your breathinh space may cause many Mold Symptoms. Scratchy throats are common. An individual may feel their throat to be scratchy almost as if they have to cough. A scratchy throat is a common black mold identifier.

There are a couple of ways to fix a mildew problem in a basement. Since the first problem in the basement is air circulation you want to purify the air and use heppa filters, better air circulation is highly recommendedt. By having new air to circulate keeping the humidity down, the basement and confined area will become a complex place for the spores to thrive and amplify.

A well-known issue that arises in killing mold mildew in a basement is searching through the carpeting. You should always be aware if there ever been a leak inside the basement or some type of water intrusion event, if so black mold may be on the carpet and rather than hiring a carpet cleaning company you may want to replace the entire carpeting. Since the carpeting became extremely damp it will be unfeasible to remove the spores from the old carpet. Even the tack strips below the carpeting would need to be removed. This is very common with basement mildew mold, just be sure to maintain the carpeting and if one is going to rip out the carpets make sure to remove the tack steps below. The wooden tack strips can carry quite a bit of mildew and mold. If you have some amount of mold in the basement and on carpeting and are tired of cleaning it continuously spray it down with a organic mold cleaning product. In order for the removal of use an all natural organic product that is used for killing mold and mildew. If you are planning on killing mold and mildew in the basement it may be a everlasting task unless you try a mold blocking solution that offers mold prevention and mold removal. Most solutions will kill the mold, but not stop it or take away the musty odor. If a mold problem becomes a bigger issue it may be to late to spray it down with an allnatural cleaning product, you need to look into hiring a certified mold inspector. They will create protocols for a mold remediation company and get the ball rolling for your mold problem.

So if you are finding a musty odor in the house, you may have mold or a previous water event that was not taken care of correctly. If ever needing more information on black mold visit a free Mold Removal Website that offers information from a certified microbial consultant.

Markus Skupeika Mold Removal

How to Use Do-It-Yourself Toxic Mold Test Kits

 

How to Use Do-It-Yourself Toxic Mold Test Kits

VANCOUVER, CANADA. Many homeowners, landlords, renters, property managers, business owners, and employees want to know, and need to know, the precise identities of the various toxic mold species inhabiting their home, rental property, or place of work, according to Phillip Fry, Certified Mold Inspector and author of the mold book Do-It-Best-Yourself Mold Prevention, Inspection, Testing, and Remediation.

To identify correctly toxic mold species, take these two steps: (1) use do-it-yourself mold test kits to collect mold samples during a thorough and complete building mold inspection and investigation; and (2) send the collected mold test samples to a mold laboratory for mold analysis and mold species identification.

Testing Visible Mold Growth

If a resident or occupant sees mold growing on a wall, ceiling, floor, heating or cooling duct register, or any other surface, he can scrape mold particles off the mold growth area onto the sticky surface of the opened mold test kit.

During such scraping of the mold growth, the tester needs to wear rubber gloves and a full-face respirator mask with organic vapor filters (such as the 3M brand from a large hardware, home improvement, or safety store) to protect against toxic mold exposure.

To do the scraping, use a new or thoroughly disinfected (with ethyl or rubbing alcohol) paint scraper. Disinfect the scraper after each individual sampling to remove any possible mold contaminants, and thus avoid mold cross-contamination in the sampling process from one sample location to another.

Print clearly and neatly on a large pressure sensitive label the property owners name, the property address, the precise test location at that address, the testing date, and the type of sampling method (mold test kit settling), time duration of the test (e.g., thirty to sixty minutes) along with the testers name and contact information.

The label should also include each individual test number, as listed on the mold chain of custody form, available free from the mold laboratory. Attach the label to the bottom of the mold test kit that contains that respective, numbered mold sample.

Mold Testing of the Indoor Air

Use a separate mold test kit to collect a mold sample from the air of each of these areas---

1. Heating/cooling duct register. Expose the sticky side of an open mold test kit (one for each duct register) to the outward airflow from each separate heating/cooling duct register. Tape the open test kit to the duct grill so that the airflow directly hits the sticky surface.

Run the heating/cooling system on fan ventilation for 10 minutes prior to removing the mold test kit from each tested duct register. Then close, seal, and label each mold test kit.

2. Room Air by the Settling Method. Mold test the air of each room, attic, basement, crawl space, and the garage by first running a cleaned fan to stir up each room or areas air all around for about 15 minutes.

Thoroughly clean the fan blades and fan guard with rubbing alcohol or ethyl alcohol after the fans use in each separate testing location.

Then shut off the fan, open up a mold test kit, place it open side upwards in the middle of the room [on the floor, or upon a table or chair] for thirty minutes to one hour to allow airborne mold spores to settle down onto the sticky surface of the mold test kit.

Be sure to use the same time for all air test locations for the standardization of the mold test results. Then close, seal, and label the mold test kits.

3. Outdoor Mold Control Test. The mold lab results of the indoor mold tests have the most significance when the results of each indoor locations testing can be compared with the results of the outdoor mold control test.

The control test should be a mold test kit left open on the ground outside the building and at least five feet beyond the drip edge of the room. Use the same time (thirty minutes to one hour) that was utilized in the indoor air tests for the settling method tests. There should be no rain or snow falling.

Self-Interpretation of Mold Test Kit Results

The tester can then either watch the test kits himself for mold growth, with self-interpretation of the mold test kit results, over a seven day time period, or send the mold test kit to the mold lab immediately, or after the self-observation growth period.

Here is how to self-interpret the visible mold growth in the mold test kits after seven days of mold growth---

1. If the tester observes and count a greater number of mold colonies of any particular mold colony type (possessing the same or similar color, shape and/or structural pattern) growing in one indoor mold test kit than in the outdoor control mold test kit, then the tester can reasonably decide that there is a possible indoor-generated mold infestation in the area/location involved in that particular mold test.

2. If the tester observes a particular mold colony type growing in a particular indoor mold test sample that is NOT present in the outdoor control mold test, then the tester can reasonably conclude that there is a possible indoor-generated mold infestation in the area/location in which he conducted that particular mold test.

3. If the tester observes three or more of the same mold colony type growing in one mold test kit, then the tester can reasonably conclude that there is a possible mold infestation in the area/location in which he conducted that particular mold test, regardless of the number of similar mold colonies present in the outdoor control test.

Why is that conclusion possible? Consider this rat analogy: if there are only three rats living inside a particular area of ones home or building, is there no indoor rat problem just because there are more rats living immediately outside of the home or building?

It is the time-cumulative exposure and body intake of even modest numbers of indoor airborne mold spores that makes residents or occupants sick from mold exposure. Because residents or occupants spend many hours per day indoors in a home or workplace, they are continually inhaling or ingesting mold spores.

When the mold spores enter into the residents eyes, nasal/sinus areas, lungs, stomach (eating and drinking food and beverages upon which airborne mold spores have landed), or open body sores, the mold-spores, once inside the body, can begin dangerous mold growth inside the body because of the abundance of body moisture and food to eat (peoples bodies)!

4. If the tester observes three or more of the same mold colony types in several or many mold tests taken from different areas of the home or building, the tester can reasonably conclude that the mold species is possibly widespread in its contamination of the tested home or building.

The most dangerous mold species to residents and occupants are the molds that are omni-present through out the home or building, thus causing widespread, cumulative mold exposure and body intake.

For more information about the use of mold test kits, mold laboratory analysis, and mold species identification, please visit---

http://www.moldlab.biz
http://www.moldinspector.com
http://www.moldmart.net
Mr. Phillip Fry is a Certified Mold Inspector and a Certified Mold Remediator. He is the author of the ebooks Mold Health Guide and Do-It-Yourself Mold Prevention, Inspection, Testing and Remediation. He also co-authored the another ebook known as Mold Legal Guide.